澳洲10最快开奖结果

Check Out The TEC Depot

澳洲10五码计划两期

Features and Benefits

  • Back pull-out to reduce maintenance down time.
  • Standard John Crane Type 21 mechanical seal for both reliability and availability. Carbon/ceramic/ BUNA standard, with other faces and elastomers available.
  • Available in all iron or bronze fitted construction for application versatility.
  • Replaceable wearing components include stainless steel shaft sleeve and casing and hub wear rings to maintain peak efficiency.
  • Enclosed impeller design, dynamic balancing and renewable wear rings reduce losses affecting performance and pump life.
  • 125 lb. ANSI flange suction/discharge connections and casing rotation for piping connection versatility.
  • NPT threaded connections are supplied on 1 1/2 x 2 – 10 and 2 1/2 x 3 – 8 models.
  • Optional rigid carbon steel bedplate, sheet metal coupling guard and T. B. Woods spacer coupling for 3756 models.

澳洲10规则

Features and Benefits

  • Superior Materials of Construction: Precision investment cast 316 stainless steel liquid end components for corrosion resistance and strength.
  • Frame Mounted Design: Flexibility of installation and driver arrangements.
  • Open Impeller Design: Spherical handling to 3/8″ reduces chance of clogging and required maintenance time.
  • Back Pull-Out Design: Simplifies maintenance by allowing the casing to remain in the piping during disassembly.
  • Close-Coupled Design: Compact design saves space and simplifies installation.
  • Casing Features: Investment cast 316 stainless steel construction with NPT threaded suction and discharge, optional drain and vent with stainless steel plugs. Four position discharge orientation.
  • Mechanical Seals: Standard John Crane Type 21 seal with carbon versus ceramic faces, Viton elastomers and 316 stainless steel metal parts. Optional seals are available for high temperature and mild abrasive services.
  • Drive Motors: NEMA standard 56J frame motors with rugged ball bearing design for continuous duty. Versions are available in both single and three phase with a variety of enclosures and voltage to match your service requirements.

澳洲10官网结果

Features & Benefits

  • Dynamic flow loss compensation capabilities
  • Full flow/pressure and electrical testing
  • Pre-programmed for easy installation and start-up
  • Rugged mechanical design with simple layout
  • 304 SS manifolds with grooved connections
  • Stainless steel vertical multi-stage or end suction pumps

澳洲10直播

Features and Benefits

  • Cast-iron bronze fitted or alloy construction bowl assembly 5″ to 30″ sizes
  • Open lineshaft with threaded or flanged column pipe
  • Enclosed or open impellers
  • Packed stuffing boa or mechanical seal
  • Above or below ground discharge with VHS or HSS motor

澳洲10正规平台

  • Application specific “Start-Up Genie” guides you through quick and easy commissioning
  • Removable, graphical control panel with display
  • Fully backlit display with large text makes the control pad easy to read
  • Info key activates on board parameter and fault descriptions
  • My Personal Menu allows user to focus on specific user selected and saved parameters
  • Alarm Log key for quick access to alarms and maintenance events
  • Alarm Log records the last 5 alarms
  • Hand on, Auto on, and Off buttons for easy pump operation at the keypad – No toggling between local and remote operation!
  • Modbus® RTU included in standard drive – Other communications available with option cards
  • Capable of controlling up to 2 fixed speed pumps, with one standard drive
  • Duplex variable speed pumping control with auto lead/lag and alternate
  • USB Connectivity – Commission and monitor through PC software
  • Transducer assembly (0-300 psi) and 16’ foot shielded cable
  • Standard dual DC-link reactors – Reduces the level of harmonics similar to a 5% AC line reactor without the voltage drop across the full load range!
  • EMC/RFI filters designed to reduce drive noise emissions and interference to strict standards.
  • Automatic Motor Adaption – For optimized performance and efficiency
  • Automated Energy Optimization – Regulates output voltage to improve system efficiency as loads change
  • Protects the pump from damage due to cavitation, dead head and blocked suction
  • Helps protect the motor from short circuit, phase loss, overload, undervoltage, overvoltage
  • Large connection area allows more space for incoming power and motor wiring

澳洲10结果走势图

  • Standard, built-in AC1 Run Rated Bypass, between start and stop
  • AC3 Bypass Contactor and DOL selector switch as option (allows user to bypass SSW-07 for DOL start and stop)
  • 3 programmable inputs (120V)
  • 2 relay outputs with NO contacts
  • 240V, 11A programmable output
  • Adjustable current, ramp time and voltage overloads
  • Protection from: – Excess starting time – Locked rotor– Current imbalance– Phase loss– Over / under current– Under voltage
  • cULus Certified, CE available as option.

澳洲10全天计划

Sump Pumps

  • Up To 110GPM
  • 1/3 – 1 1/2 HP
  • Single Phase and Three Phase
  • Maximum Head 66′
  • Solids Up To 3/8″
  • Discharge Size: 1 1/2″ NPT and 2″ Hose

Submersible Sewage Pumps

  • Up To 1200GPM
  • 1/3 – 40 HP
  • Single Phase and Three Phase
  • Maximum Head To 140′
  • Discharge Size: 2″ and 3″ NPT and 3″ and 4″ Flanged

Submersible Effluent Pumps

  • Up To 130 GPM
  • 1/3 – 2 HP
  • Single Phase and Three Phase
  • Maximum Head 240′
  • Discharge Size: 1 1/2″ and 2″ NPT

Submersible Grinder Pumps

  • Up to 200 GPM
  • 2, 3, 5 and 7 1/2 HP
  • Single Phase and Three Phase
  • Maximum Head 180′
  • Solids Up To 3″
  • Discharge Size: 1 1/4″, 1 1/2″ and 2″ NPT

澳洲10开奖查询

Sump Pumps

  • Up To 110GPM
  • 1/4 – 1 1/2 HP
  • Single Phase and Three Phase
  • Maximum Head 66′
  • Solids Up To 3/8″
  • Discharge Size: 1 1/4″ – 1 1/2″ NPT and 2″ Hose

Submersible Effluent Pumps

  • Up To 140 GPM
  • 1/3 – 2 HP
  • Single Phase and Three Phase
  • Maximum Head 240′
  • Solids Up To 3/4″
  • Discharge Size: 1 1/2″ and 2″ NPT

Submersible Sewage Pumps

  • Up To 600GPM
  • 1/3 – 7 1/2 HP
  • Single Phase and Three Phase
  • Maximum Head To 82′
  • Solids Up To 3″
  • Discharge Size: 2″ and 3″ NPT and 3″ and 4″ Flanged

Submersible Grinder Pumps

  • Up to 40 GPM
  • 2 HP
  • Single Phase, 208/230 Volt
  • Maximum Head 95′
  • Solids Up To 3″
  • Discharge Size: 1 1/4″ NPT

澳洲10在线开奖号码

Learn More

澳洲10计划网

Learn More

澳洲10全天开奖

Learn More

澳洲10计划软件